Continental SIMOS8.2 Tricore positioning frame adapter for CMD Flash
€189.00
Delivery in 5 - 7 days
SKU
SIMOS8ADEU
Adapter set for Conti SIMOS8.2, contains probe, ECU cable and programming cable for CMD TriCore Flashtool.
This probe set can be used on all VAG 3.0 ltr. gasoline engines with Continental SIMOS8.2 ECU for unlocking and flashing on the table.
After removing the control unit, with the CMD Flash and the probe the ECU is unlocked. Then the software can be flashed through the read / write adapter cable directly, without the ECU re-installed into the vehicle.
| Brand | CMD - Flashtec |
|---|
Adapter set for Conti SIMOS8.2, contains probe, ECU cable and programming cable for CMD TriCore Flashtool.
This probe set can be used on all VAG 3.0 ltr. gasoline engines with Continental SIMOS8.2 ECU for unlocking and flashing on the table.
After removing the control unit, with the CMD Flash and the probe the ECU is unlocked. Then the software can be flashed through the read / write adapter cable directly, without the ECU re-installed into the vehicle.
The set consists of:
1 piece SIMOS8.2 probe
1 piece cable with ECU connector and terminal CMD
1 piece Read / Write Adapter cable for programming outside of the vehicle
1 user manual in PDF format.
| Brand | CMD - Flashtec |
|---|
Write Your Own Review
